Are you trying to find a simple efficient gold recovery procedure?
Allow me to tell you about mineral processing equipment that is being used successfully all around the world, by large scale mining operations through to artisanal miners.
It’s an alternative to using cyanide.
One of the very efficient and simple technology does NOT require the use of harmful chemicals.
Sure, using a cyanide solution for gold leaching is prevalent.
BUT, as Wired magazine by the UK points out…
The waste product from cyanidation is a disgusting and poisonous gloop that could seep into rivers or toxin groundwater, killing wildlife and rendering landscape sterile. Huge pits of ore could be subjected to cyanide leaching in mines, with the runoff a major environmental hazard which requires a significant cost to render secure.
Rather than that, why don’t you utilize gravity?
GRAVITY SEPARATION IS COST-EFFECTIVE
Gravity separation of fine gold has been the functioning principle in many low-cost mineral processing plants, all over the world.
That is in both small-scale and large-scale mineral extraction operations.
By way of example, a little gold vibration table employs a low-capacity vibrating table for gold extraction.
Of course, it is not just for gold. Mineral extraction using a concentrating table works for regaining other valuable metals and minerals too, such as all heavy minerals, heavy mineral sands, illmenite, rutile, gemstones, platinum, tin, wolfram, tantalite, zircon, topaz and diamonds.
The Wave Table is ideal for cleaning up sluice box separating and concentrates gold from black sands, also. The Wave Table is perfect for cleaning up centers from Knelson, Falcon, Knudsen, STLBs and other centrifugal concentrators. (For big throughputs and higher capacity mining/processing operations, particularly for gold, we will be able to aid you with the most cost effective Centrifugal Concentrators.)
Larger mines are utilizing Wave Tables to perform closing gold clean-ups and the’finishing’ of gold concentrates. This process eliminates the need to use cyanide or mercury.
Gold tide tables are a lot better for the environment, as well as for workplace safety!
If you want to effectively recover fine gold from gold bearing ore, then you will need a Centrifugal Concentrator. By way of instance, a 1-3 TPH unit will handle both alluvial and hard rock material.
In a large mineral processing plant, you might use a Centrifugal Concentrator (known in some states as an STLB) to execute the key concentration. That’s, to regain all the gold and heavy minerals from the ore feed.
This recovered substance is referred to as the’concentrates’, or’cons’ for short.
But to actually get’clean gold’, you have to then run the cons through another process (a secondary concentrator), like running the drawbacks over a Wave Table. By doing this, an updated percentage is recovered that is a lot smaller in bulk, so it is easier to take care of.
When targets are washed up on a Wave Table, you produce clean gold prepared to be smelted and become a gold bar for sale.
All this without using cyanide or mercury.
Another cyanide-free alternative is chemical leaching.
Gold can be pulled from run of mine ore in addition to from concentrates using the Chemical Leaching System, and it is a cost effective non-cyanide gold leaching system which GoldWaveTables.com can assist you with.
CLS may be used for virtually any metal but is especially used for the recovery of gold, silver and platinum group metals.
This incredible gold split apparatus comes in 3 models covering all scales of operation. Despite the name, a gold wave table works to extract ANY thick mineral, where there is a specific gravity (density) differential between the valuable heavy mineral component and its own gangue or host substance. Additionally, it cleans grit and gold in the stripped carbon employed in CIP/CIL applications.
THE ULTIMATE DEVICE
To quote Ian, a 30-year experienced in the mining and minerals industry,”I have personally had success with the Wave Table recovering very nice heavy minerals like gold, mineral sands, zircon, rutile, illmenite, tantalite, scheelite, stibnite etc.. Because it is so efficient at recovering very fine particle sizes, it has proved excellent as a scavenger on tailings. The Wave Table will readily recover 5 micron gold from tailings. In mineral processing, it is frequently that which you shed to tailings that’s as important as what you recuperate. I have found that the Wave Table is the greatest device to test tailings for missing heavy minerals, such as gold. A very simple test in your tailings will only take a few minutes. You will observe any heavy nutrient dropped in the tailings within a short time period. This type of test will obviate the need for prolonged firing assay turn around times.”
MICRON MILL WAVE TABLE
The most significant model is that the M10 which does around 8TPH (tonnes per hour) and the M8 model does around 1TPH. The smallest model, the M5, is acceptable for small cleanups of 20 kgs per hour and can be utilised as a laboratory unit.
– Better for workplace security too
– Never use mercury or cyanide again
– Low water usage
– efficient and cost-effective.
Whenever you are on the lookout for gold recovery plant available, check out GoldWaveTables.com
The Wave Table may be used in the smallest to the biggest gold mine. They may be used for full scale production purposes, or just as a cleanup or concentration device from the golden room.
The Wave Table has become increasingly being used to recover gold from test samples of a few kgs in size and upward. This form of majority testing is fast and the quantitative outcomes mean that you’re not solely relying on flame assays or AAS, particularly in visible free gold deposits, even when gold is fine (5 to 20 microns).
Visit https://GoldWaveTables.com to learn more today.
We can also assist you with a Chemical Leaching System, including supplies and training. Contact us for the “CLS Manual on Non-Cyanide Leaching”.
Also learn more about Mineral Processing Plant here.